Skip to product information
1 of 1

Mapping Network

Outdoor Meshtastic Node Kit (radio not included)

Outdoor Meshtastic Node Kit (radio not included)

Regular price $229.99 CAD
Regular price $335.95 CAD Sale price $229.99 CAD
Sale Sold out
Shipping calculated at checkout.
Quantity

Ask about compatibility or shipping

Everything you need to put your own Meshtastic node on a roof or mast, except the radio. You bring the board, and this kit gives it a weatherproof enclosure, power over one Ethernet cable, a tuned 915 MHz antenna and lightning protection. All parts are in stock and ship from Ontario. Prices are in CAD.

Shipping & returns

Canada: free shipping on orders CAD $99+, excluding oversized items and rural and northern areas (such as Yukon, Nunavut and the Northwest Territories). Those, and smaller orders, are calculated at checkout, and pallet freight is quoted.

Outside Canada: we ship worldwide, and shipping is calculated at checkout.

Returns: available on orders shipped within Canada only, with approval and an RMA number. We do not accept returns on orders shipped outside Canada.

See our shipping policy and refund policy for details.

View full details

Details

What's in the box

  • 1x RAKwireless outdoor enclosure (SKU A10001), with a PoE injector and power cord, a PoE splitter (USB Type-C output, 5 V / 2.4 A), an internal N to RP-SMA male antenna cable, cable ties, PVC tape and waterproof tape
  • 1x Nebra 5.8 dBi 915 MHz fibreglass antenna (N male)
  • 1x Laird lightning surge arrestor (N female to N female)
  • 1x N male to N male adaptor
  • 1x RBT 200-series low-loss coaxial cable (comparable to LMR-200), N female to N male, 50 ft

Not included

  • The Meshtastic radio board (for example Heltec, LILYGO T-Beam or RAK WisBlock)
  • The adaptor your board needs to reach the enclosure's internal RP-SMA cable. Boards with an SMA port, such as Heltec and LILYGO T-Beam, need an RP-SMA female to SMA male adaptor. Boards with an IPEX (u.FL) port, such as the RAK WisBlock RAK4631, need an IPEX to RP-SMA female bulkhead pigtail, which we don't stock.
  • A solar panel or battery. This kit runs on PoE only.
  • A mast or pole mount, and a ground wire for the arrestor

How it connects

Antenna → lightning arrestor → N male to N male adaptor → 50 ft cable → the enclosure's N female bulkhead. Inside the enclosure, the internal N to RP-SMA cable (plus the adaptor or pigtail your board needs) goes to the radio. The PoE splitter powers the board from its USB-C 5 V output.

Before you order

  • Check that your board fits inside the enclosure and can run from a 5 V USB supply.
  • The PoE injector and splitter are 10/100 Mbit/s and are used here for power.
  • Ground the lightning arrestor following your local electrical code.

Returns: these accessories follow our 30-day return policy for Canadian orders (an RMA is required). International orders are final sale.